Central Loose Tube All-Dielectric Cable Dry

Central loose tube all-dielectric cable dry is the most commonly-deployed outdoor cable, because of its price and its installation flexibility, since these cables can be installed both in aerial (lashed) installations as well as in ducts through the following techniques: air-blown, jetted or pulled into a duct.

APPLICATIONS
PROTECTIONS

Clear

Description

Central Loose Tube All-Dielectric Cable Dry

Central loose tube all-dielectric cable dry is the most commonly-deployed outdoor cable, because of its price and its installation flexibility, since these cables can be installed both in aerial (lashed) installations as well as in ducts through the following techniques: air-blown, jetted or pulled into a duct.

Single loose tube made of PBT which provides great mechanical properties under a wide range of conditions such as crush test and impact test. Dry water blocking technology allows a cleaner and quicker installation as well as a cost-friendly cable preparation.

 

PE single jacket with additives makes a resistant, durable and easy to strip cable, providing superior protection against UV radiation, fungus, abrasion and other environmental factors.

A single ripcord ensure a quick fiber access.

 

The cable contains glass yarn that helps increase tensile strength.

Additional information

Fiber Count

1 Fiber, 2 Fibers, 4 Fibers, 6 Fibers, 8 Fibers, 12 Fibers

Fiber Type

Waveoptics G652.D, Waveoptics G657.A1, Waveoptics G657.A2, OFS G652.D

Cable Length

10,000 ft, 15,000 ft, 20,000 ft, 40,000 ft

Design Properties

Fiber per Tube 1-12
Nominal Outer Diameter 7 mm (0.28 in) (±5%)
Dielectric Strength Member Glass Yarn
Outer Jacket Material / Thickness Polyethylene / 1.9 mm (0.07 in)
Loose Tube Material / Diameter PBT / 3 mm (0.12 in)
Drum Length 10,000 ft, 15,000 ft, 20,000 ft & 40,000 ft (±5%)

Temperature Range

Operation -40°C to 70°C (-40°F to 158°F)
Installation -30°C to 70°C (-22°F to 158°F)
Storage / Transport -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush Resistance (Short-Term / Long-Term) 1,100 N/100mm / 500 N/100mm
Minimum Bend Radius (Operation / Installation) 10 x OD / 20 x OD