Reel-in-a-Box Rugged Toneable Flat Drop Cable

Reel-in-a-box packaging makes a quicker and easier installation, providing a cost-friendly and time-efficient installation method.
This slightly more compact flat drop cable design is more robust and stiffer than the traditional flat drop cable because of its two parallel 2 mm dielectric strength members that significantly increase the impact and crush resistance properties of the cable.

APPLICATIONS
PROTECTIONS

Clear

Description

Reel-in-a-Box Rugged Toneable Flat Drop Cable
Waveoptics® Flat Drop Cable is designed for self-supporting, direct-buried and duct installations. Fully dielectric design, ideal for drop applications, offering ease of access as well as easy installation.
Single loose tube made of PBT which provides great mechanical properties under a wide range of conditions such as crush test and impact test. PE single jacket with additives makes a resistant, durable and easy to strip cable, providing superior protection against UV radiation, fungus, abrasion and other environmental factors.
Two parallel dielectric strength members that require no bonding or grounding, offering exceptional crush resistance. The FRP strength members are coated with EAA for improved adherence.
This slightly more compact flat drop cable design is more robust and stiffer than the traditional flat drop cable because of its two parallel 2 mm dielectric strength members that significantly increase the impact and crush resistance properties of the cable. The FRP strength members are coated with EAA for improved adherence.
Copper toning conductor allows effortless detection in direct-buried installation.
Reel-in-a-box packaging makes a quicker and easier installation, providing a cost-friendly and time-efficient installation method.

Additional information

Fiber Count

1 Fiber, 2 Fibers, 4 Fibers, 6 Fibers, 8 Fibers, 12 Fibers

Fiber Type

Waveoptics G652.D, Waveoptics G657.A1, Waveoptics G657.A2, OFS G652.D, OFS AllWave® FLEX, OFS AllWave® FLEX+

LT Water Protection

Dry, Gel-Filled

Design Properties

Fiber per Tube 1-12
Nominal Outer Dimensions 9.9 mm x 4.3 mm (0.39 in x 0.17 in) (±5%)
Dielectric Strength Member Material / Diameter EAA Coated FRP / 2.0 mm (0.068in)
Toning Conductor 24 AWG Copper Wire
Outer Jacket Material Polyethylene
Loose Tube Material / Diameter PBT / 2 mm (0.08 in)
Drum Length 1,500 ft (±5%)

Temperature Range

Operation -40°C to 70°C (-40°F to 158°F)
Installation -30°C to 70°C (-22°F to 158°F)
Storage / Transport -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush Resistance (Short-Term / Long-Term) 2,200 N/100mm / 1,100 N/100mm
Minimum Bend Radius (Operation / Installation) 10 x OD / 20 x OD